Configuring Switch Information 219
–Half—The interface supports transmission between the device and the client in
only one direction at a time.
•Flow Control—Indicates if Flow Control is enabled on the LAG. The possible values
are:
–Off—Disables Flow Control on the LAG. This is the default value.
–On—Enables Flow Control on the LAG.
–Auto-negotiation—Enables auto negotiation of Flow Control on the LAG.
•Current Flow Control—Indicates the current Flow Control setting. The possible
values are:
–Off
–On
– Auto-negotiation
Defining LAG parameters:
1Open the LAG Configuration page.
2Select a LAG in the LAG field.
3Define the Description, Admin Status, Port Speed, Admin Auto Negotiation, Admin
Speed, and/or Admin Flow Control fields.
4Click Apply Changes. The LAG parameters are saved to the device.
Modifying LAG parameters:
1Open the LAG Configuration page
2Select a LAG in the LAG field.
3Modify the Description, Admin Status, Port Speed, Admin Auto Negotiation, Admin
Speed, and/or Admin Flow Control fields.
4Click Apply Changes. The LAG parameters are saved to the device.
Displaying the LAG Configuration Table:
1Open the LAG Configuration page.
2Click Show All. The LAG Configuration Table opens.