Dell 3324, 3348 Terminal Connection Configuration

Configuring the PowerConnect 3324/3348 Switch 45

The baud rates can be manually changed to any of the following values:

• 2400

• 4800

• 9600

• 19,200

• 38,400

• 57,600

• 115,200

NOTE: The default baud rate is 9600.

NOTE: Closing the device does not return the default baud rate. It must be specifically

configured.

NOTE: In order to enter configuration mode, you must specify administrative level 15

privileges.

The following is an example configuration for changing the default baud rate using CLI

commands:

console> enable

console# configure

console(config)# line console

console(config-line)# speed 9600

console(config-if)# exit

console(config)# exit

Terminal Connection Configuration

The PowerConnect 3324/3348 requires the following Terminal Connection parameters for

configuration:

•no parity

• one stop bit

• 8 data bits