Dell 400 owner manual Creating a Spare Hard Drive, To Mark a Drive as a Spare Hard Drive

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Creating a Spare Hard Drive

A spare hard drive may be created with a RAID level 1 configuration. The spare hard drive will not be recognized by the operating system, but you will be able to see the spare drive from within Disk Manager or the Intel RAID Option ROM utility. When a member of the RAID level 1 configuration is broken, the computer automatically rebuilds the mirror configuration using the spare hard drive as the broken member’s replacement.

To Mark a Drive as a Spare Hard Drive:

1Click the Start button and point to Programs→ Intel(R) Application Accelerator→ Intel Matrix Storage Manager to launch the Intel® Storage Utility.

2Right-click the hard drive you want to mark as a spare hard drive.

3Click Mark as Spare.

To Remove Spare Marking From a Spare Hard Drive:

1Right-click the spare hard drive icon.

2Click Reset Hard Drive to Non-RAID

Rebuilding a Degraded RAID Level 1 Configuration

If your computer does not have a spare hard drive, and the computer has reported a degraded RAID level 1 volume, you can manually rebuild the computer’s redundancy mirror to a new hard drive by performing the following steps:

1Click the Start button and point to Programs→ Intel(R) Application Accelerator→ Intel Matrix Storage Manager to launch the Intel® Storage Utility.

2Right-click the available hard drive to which you want to rebuild the RAID level 1 volume, and click Rebuild to this Disk.

You can use your computer while the computer is rebuilding the RAID level 1 volume.

36

Setting Up and Using Your Computer