7.Press inward on the two tabs on the sides of the drive, and then slide the drive upward and remove it from the drive bay.

8.If the replacement drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. Attach the bracket to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and then inserting and tightening all four screws (two screws on each rail).

9.Gently slide the drive into place until the tabs securely click into position.

10.Connect the power and data cables to the drive.

Page 19
Image 19
Dell 4300s technical specifications