Dell 4500C manual Installing a Video Card

notch

lever

tab card clip

AGP connector

PCI connector back of computer

Installing a Video Card

NOTICE: You must use low-profile cards for your computer. A full-size card can damage the computer or the card.

1To add or replace the card, press the card lever toward the PCI connector and gently press the card into the AGP connector until it clicks into place.

2Release the card lever, ensuring that the tab fits into the notch on the front end of the card.

3Secure the card by lowering the hinged lever on the back panel.

4Close the computer cover (see page 92).

5Attach the computer stand (see page 21).

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

6Connect your computer and devices to electrical outlets, and turn them on.

HINT: If you purchased the optional video card, ensure that you connected your monitor cable to the correct video connector.

Adding Parts

89