Dell 7000 Series manual NSF Scenario Configuration via CLI, Router

Stacking Dell PowerConnect 7000 Series Switches

NSF Scenario Configuration via CLI

Router 1:

configure terminal hostname Router_1 ip multicast

ip pim rp-address 192.168.10.1 239.0.1.1 255.255.255.0 ip pim sparse

vlan database vlan 10

exit

interface vlan 10

ip address 192.168.10.1 255.255.255.0 ip pim

exit

router ospf router-id 1.1.1.1

network 192.168.0.0 0.0.255.255 area 0 enable

exit

interface Port-channel1

description “LAG to switch stack – gi1/0/10, gi1/0/20” switchport mode trunk

switchport trunk native vlan 10 switchport trunk allowed vlan remove 1

exit

interface GigabitEthernet 1/0/1 description “Interface to multicast source” no spanning-tree

switchport access vlan 10 exit

interface GigabitEthernet 1/0/10 no spanning-tree auto-portfast channel-group 1 mode auto

exit

interface GigabitEthernet 1/0/20 no spanning-tree auto-portfast channel-group 1 mode auto

exit

-----------------------------------------

Page 25