Dell C6105 Installing the Sensor Board for 2.5 HDD System

130 | Installing System Components
11 Remove the sensor board from the sensor-board holder. See Figure 3-
40.
Figure 3-40. Removing and Installing the Sensor Board
1 screw 2 sensor-board holder
Installing the Sensor Board for 2.5” HDD System
CAUTION: Many repairs may only be done by a certified service t echnician. You
should only perform troubleshooting and si mple repairs as authorized in your
product documentation, or as directed by the o nline or telephone service and
support team. Damage due to servicing that is n ot authorized by Dell is not
covered by your warranty. Read and follow the safet y instructions that came with
the product.
1 Replace the sensor board into the sensor-board holder. See Figure 3-40.
2 Replace the sensor board assembly into the hard drive cage. See Figure
3-39.
3 Replace the screw that secure the sensor board to the hard drive cage.
See Figure 3-39.
4 Connect the sensor board cable to the sensor board. See Figure 5-13.