Installing System Components | 81
3 Disconnect all the cables from the daughter card.
4 Remove the three screws that secure the daughter card. See Figure 3-
12.
5 Lift the daughter card out of the system-board assembly. See Figure 3-
12.
Figure 3-12. Removing and Installing the SAS Daughter Card
1 screw (3) 2 daughter card
Installing the SAS Daughter Card
CAUTION: Many repairs may only be done by a cert ified service technician. You
should only perform troubleshooting and si mple repairs as authorized in your
product documentation, or as directed by the o nline or telephone service and
support team. Damage due to servicing that is n ot authorized by Dell is not
covered by your warranty. Read and follow the safet y instructions that came with
the product.
1 Place the daughter card on the system-board assembly. See Figure 3-12
and Figure 5-10.
2 Replace the three screws that secure the daughter card. See Figure 3-12.