Installing System Components | 67
Figure 3-5. Removing and Installing a Power Supply
1
handle
2
power supply
3 release lever
Installing a Power Supply
CAUTION: Many repairs may only be done by a cert ified service technician. You
should only perform troubleshooting and simpl e repairs as authorized in your
product documentation, or as directed by the o nline or telephone service and
support team. Damage due to servicing that is n ot authorized by Dell is not
covered by your warranty. Read and follow the safet y instructions that came with
the product.
CAUTION: The System requires one power suppl y to operate normally.
1 Verify that both power supplies are of the same type and have the same
maximum output power.
NOTE:
The maximum output power is printed on the power supply label.
2 Slide the new power supply into the chassis until the power supply is
fully seated and the release lever snaps into place. See Figure 3-5.
3 Connect the power cable to the power supply and plug the cable into a