84 | Installing System Components
DIMM
Processor 1
DIMM
D0
DIMM
D1
DIMM
D2
DIMM
C0
DIMM
C1
DIMM
C2
SR/DR
1
−
−
−
−
−
−
2 − − − − − −
2 − − − − − √
4 − − − − − −
4 − − √ −
− √
6 − − −
−
− −
8 √
− √ √ − √
12 √ √ √ √ √ √
QR
4
−
√
−
−
√
−
NOTE:
An empty DIMM socket is marked as “−”. For best performance, all the
memory modules installed must be of the same speed, capa city, and from the
same manufacturer. SR is Single Rank, DR is Dual Rank and QR is Quad Rank.
Removing the Memory Modules
WARNING: The memory modules are hot to the touch for some time aft er the
system has been powered down. Allow time for t he memory modules to cool
before handling them. Handle the memory mod ules by the card edges and avoid
touching the components on the memory modul e.
CAUTION: Many repairs may only be done by a cert ified service technician. You
should only perform troubleshooting and si mple repairs as authorized in your
product documentation, or as directed by the online or telephone servi ce and
support team. Damage due to servicing that is n ot authorized by Dell is not
covered by your warranty. Read and follow the safet y instructions that came with
the product.
1 Turn off the system, including any attached peripherals, and
disconnect the system from the electrical outlet.
2 Remove the system-board assembly. See "Removing a System-Board
Assembly" on page 68.
3 Locate the memory module sockets. See Figure 3-13.