Installing System Components | 103
NOTE:
To install the second power distribution board that is below the first
power distribution board, angle the board during instal lation.
2 Replace the screws securing the second power distribution board to the
system. See Figure 3-22.
3 Replace the power distribution board-connector. See Figure 3-22.
4 Connect all the cables to the second power distribution board. See
Figure 5-12.
You must route these cables properly through the tabs on the chassis to
prevent them from being pinched or crimped.
5 Replace the screws securing the first power distribution board to the
system. See Figure 3-22.
6 Connect all the cables to the first power distribution board. See Figure
5-12.
You must route these cables properly through the tabs on the chassis to
prevent them from being pinched or crimped.
7 Replace the power supply. See "Installing a Power Supply" on page 67.
8 Close the system. See "Closing the System" on page 98.
9 Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.
Fan Controller Board
Removing the Fan Controller Board
CAUTION: Many repairs may only be done by a cert ified service technician. You
should only perform troubleshooting and si mple repairs as authorized in your
product documentation, or as directed by the o nline or telephone service and
support team. Damage due to servicing that is n ot authorized by Dell is not
covered by your warranty. Read and follow the safet y instructions that came with
the product.