Installing System Components | 93
Removing the RAID Battery Carrier
CAUTION: Many repairs may only be done by a cert ified service technician. You
should only perform troubleshooting and si mple repairs as authorized in your
product documentation, or as directed by the o nline or telephone service and
support team. Damage due to servicing that is n ot authorized by Dell is not
covered by your warranty. Read and follow the safet y instructions that came with
the product.
NOTE: The information in this section applies only t o systems with the optional
RAID controller card.
1 Turn off the system, including any attached peripherals, and
disconnect the system from the electrical outlet.
2 Remove the system-board assembly. See “Removing a System-Board
Assembly” on page 68.
3 Remove the RAID battery. See “Removing the RAID Battery” on page
91.
4 Remove the three screws securing the RAID battery carrier to the
interposer extender. See Figure 3-18.
5 Replace the system-board assembly. See “Installing a System-Board
Assembly” on page 69.
6 Reconnect the system to the electrical outlet and turn the system on,
including any attached peripherals.