Dell E10J, E09J owner manual SCv2000/SCv2020 Technical Specifications

Back-Panel Ports Connectors (per Storage Controller)

Fibre Channel, iSCSI, or	Connection to a Fiber Channel fabric, iSCSI network, or a direct connection
SAS connectors	to servers with SAS HBAs
Ethernet connectors	MGMT: 10 Mbps, 100 Mbps, or 1 Gbps embedded Ethernet port used for
	Storage Center management
	REPL: 10 Mbps, 100 Mbps, or 1 Gbps embedded iSCSI port used for
	replication to another Storage Center

SAS connectors

USB connector

6 Gbps SAS connectors for SAS port redundancy and additional expansion enclosures

NOTE: SAS connectors are SFF-8086/SFF-8088 compliant

One USB 3.0 connector.

Not for customer use on SCv2000/SCv2020 storage systems.

Serial connector	NOTE: Not for customer use
LED Indicators
Front panel	• One two-color LED indicator for system status.

•One single-color LED indicator for power status.

•Two digit, seven-segment display indicating the storage system ID number

•ID button with a single-color LED indicating startup and pressed states

Hard drive carrier	• One single-color activity LED
	• One single-color LED status indicator per drive
Storage controller	• Two single-color LEDs per Ethernet port indicating activity and link speed
	• Four dual-color LEDs per SAS connector indicating port activity and status
	• One single-color LED indicating status
	• One single-color LED indicating fault
	• One single-color LED for identification
	• Eight single-color LED for diagnostics
Power supply/cooling	Four LED status indicators for Power Supply Status, AC Fail status, DC Fail
fan	status, and Fan Fail status

Power Supplies

AC power supply (per power supply)

Wattage	580 W (maximum wattage: 584 W)
Voltage	100–240 VAC (7.6–3.0 A)
Heat dissipation	SCv2000: 65 W at 230 VAC and 99 W at 115 VAC
	SCv2020: 65 W at 230 VAC and 99 W at 115 VAC

40 SCv2000/SCv2020 Technical Specifications