Dell E11J001 owner manual Item

SCv2080 Storage Controller with SAS Front-End Ports

Features and indictors on a storage controller with SAS front-end ports.

Figure 7. SCv2080 Storage Controller with Four 12 Gb SAS Front-End Ports

Item	Control/Feature	Icon Description
1	Battery status indicator	• Blinking green (on 0.5 sec. / off 1.5 sec.): Battery heartbeat

•Fast blinking green (on 0.5 sec. / off 0.5 sec.): Battery is charging

•Steady green: Battery is ready

2 Battery fault indicator • Off: No faults

•Blinking amber: Correctable fault detected

•Steady amber: Uncorrectable fault detected; replace battery

3	MGMT port	—	10 Mbps, 100 Mbps, or 1 Gbps Ethernet port used for storage
			system management and access to the BMC
			NOTE: To use the MGMT port as an iSCSI port for
			replication to another Storage Center, a Flex Port license
			and replication license are required. To use the MGMT port
			as a front-end connection to host servers, a Flex Port
			license is required.
4	REPL port	—	10 Mbps, 100 Mbps, or 1 Gbps Ethernet/iSCSI port used for
			replication to another Storage Center
			NOTE: To use the RELP port as a front-end connection to
			host servers, a Flex Port license is required.
5	SAS activity indicators	—	• Off: Port is off
			• Steady green: Port is on, but without activity
			• Blinking green: Port is on and there is activity
6	Storage controller		On: Storage controller completed POST
	module status

7Recessed power off button

8Storage controller module fault

Powers down the storage controller if held for more than five seconds

•Off: No faults

•Steady amber: Firmware has detected an error

•Blinking amber:Storage controller is performing POST

About the SCv2080 Storage System 15