5.Select Power Supplies. The status of each power supply is displayed in the Power Supplies tab.
6.Select the failed power supply. The location of the failed power supply is displayed in the Power Supply View tab.
Figure 12. Rear View of the Enclosure Showing the Failed the Power Supply
Replacing a PSU
Use this procedure to replace a failed power supply unit (PSU).
Prerequisites
1.Use SupportAssist to send diagnostic data to Dell Technical Support Services.
2.Contact Dell Technical Support Services to let them know that you are performing a repair.
About this task
You can replace power supply units one at a time without shutting down the storage system. Steps
1.Press the power switch to turn off the PSU.
2.Remove the power cable from the securing clip and disconnect the power cable from the PSU.
3.Push the release tab on the PSU to the right and slide it out of the chassis using the handle.
CAUTION: The PSUs are heavy. To avoid injury, use both hands while removing the module.
Replacing SCv2080 Components | 23 |
