Back-Panel Ports Connectors (per Storage Controller)
| NOTE: SAS connectors are SFF-8086/SFF-8088 compliant. |
USB Connector | One USB 3.0 connector used for Storage Center updates |
Serial connector | NOTE: Not for customer use. |
|
| |
LED Indicators | |
| |
Front panel | • One two-digit LCD indicator for Unit ID, error code, and unit location |
| identifier |
| • One two-color LED indicator for power status |
| • One single-color LED indicator for module fault status (enclosure as a |
| whole) |
| • One single-color LED indicator for logical fault status (drive, HBA, RAID |
| controller, and so on) |
| • One single-color LED indicator for drawer 1 fault status |
| • One single-color LED indicator for drawer 2 fault status |
Drawer | • One single-color LED indicator for sideplane card and power status |
| • One single-color LED indicator for drawer fault status |
| • One single-color LED indicator for logical fault status |
| • One single-color LED indicator for cable fault status |
| • Six single-color LED indicators for data transfer status |
Disk Drive In Carrier | One single-color LED for drive fault status |
(DDIC) | |
6 Gb SAS IO module | 14 one-color LED status indicators, four each for the three SAS ports and two |
| for the module status |
Cooling module | • One single-color LED indicator for module status |
| • One single-color LED indicator for battery fault status (not currently used) |
| • One single-color LED indicator for fan fault status |
Power Supply Unit (PSU) • One single-color LED indicator for PSU fault status
•One single-color LED indicator for AC power fault status
•One single-color LED indicator for power status
Power Supplies
AC power supply (per power supply)
Wattage | 2.8 kW |
Voltage | 200–240 VAC (16 A) |
Heat dissipation | 191-147 W |
Input frequency | 50/60 Hz |
Max input power | 1791 VA |
Input current | 7.4 A@241 VAC |
SCv2080 Technical Specifications | 43 |
