Back to Contents Page
Setting Up the Monitor
Dell™ E1911 monitor User's Guide
Attaching the Stand
Connecting Your Monitor
Removing the Stand Base
Attaching the Dell Soundbar (Optional)
Removing the Stand for VESA wall mount
Attaching the Stand
NOTE: The stand base is detached when the monitor is shipped from the factory.
To attach the monitor stand body to the stand base:
1.Place the monitor stand base on a stable table top.
2.Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place.
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.
To connect your monitor to the computer:
1.Turn off your computer and disconnect the power cable.
Connect the blue (VGA) cable from your monitor to your computer.
