Installing the System Fan
1.Place the system fan in the computer.
2.Tighten the screws to secure the fan to the computer.
3.Install:
a)power connector
b)system board
c)network connector
d)modem card
e)left support frame
f)right support frame
g)display assembly
h)ExpressCard reader cage
i)palmrest
j)thermal module
k)right base panel
l)WLAN card
m)hard drive
n)optical drive
o)keyboard
p)keyboard trim
q)access panel
r)battery
s)SD memory card
4.Follow the procedures in After Working Inside Your Computer.
Removing the Network Connector
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a)SD memory card
b)battery
c)access panel
d)keyboard trim
e)keyboard
f)optical drive
g)hard drive
h)right base panel
i)palmrest
j)display assembly
k)right support frame
l)left support frame
m)modem card
3.Remove the network connector cables from the routing channels.
4.Remove the network connector jack.
46
