Table
Problem | Probable Cause | Corrective Action |
|
|
|
You are prompted to | The TCP/IP | The |
configure one network | configuration | public network must be assigned |
instead of two during | is incorrect. | static IP addresses on different |
MSCS installation. |
| subnets. For information about |
|
| assigning the network IPs with a |
|
| specific variant of the Windows |
|
| Server operating system (for |
|
| example: Windows Server 2003 |
|
| or Windows Server 2008), see |
|
| Dell Failover Clusters with |
|
| Microsoft Windows Server |
|
| Installation and |
|
| Troubleshooting Guide. |
|
|
|
| The private | Ensure that all systems are |
| point) network is | powered on so that the NICs in |
| disconnected. | the private network |
|
| are available. |
|
|
|
Using Microsoft | Normal. Some | Dell strongly recommends that |
Windows NT® 4.0 to | resources in | you use Windows XP |
remotely administer a | Windows Server 2003 | Professional or Windows Server |
Windows Server 2003 | are not supported in | 2003 for remote administration |
cluster generates error | Windows NT 4.0. | of a cluster running Windows |
messages. |
| Server 2003. |
50
