Dell EMC AX4-5 manual Cabling a SAN-Attached Cluster to an AX4-5F Storage System

Cabling a SAN-Attached Cluster to an AX4-5F Storage System

1Connect cluster node 1 to the SAN.

a Connect a cable from HBA port 0 to Fibre Channel switch 0 (sw0). b Connect a cable from HBA port 1 to Fibre Channel switch 1 (sw1).

2Repeat step 1 for each cluster node.

3Connect the storage system to the SAN.

a Connect a cable from Fibre Channel switch 0 (sw0) to SP-A Fibre port 0(first fibre port).

b Connect a cable from Fibre Channel switch 0 (sw0) to SP-B Fibre port 1(second fibre port).

c Connect a cable from Fibre Channel switch 1 (sw1) to SP-A Fibre port 1(second fibre port).

d Connect a cable from Fibre Channel switch 1 (sw1) to SP-B Fibre port 0(first fibre port).

Cabling Your Cluster Hardware

27