Nikon 5000ED Installing the Scanner, Choose a Location, Optional Adapters for the 5000 ED

Installing the Scanner

Step 1—Choose a Location

Choose a flat, stable location close to the computer.

Installing the Scanner

Do NOT install the scanner where other objects would block its vents or where it would be exposed to:

•direct or reflected sunlight

•condensation or rapid temperature changes

•electromagnetic interference from other electronic devices

•temperatures over 35 °C (95 °F) or below 10 °C (50 °F)

•excessive dust

•water vapor from a humidifier or similar device

•smoke

The scanner can be installed with either the top or side vents uppermost (see illustration be- low). Leave at least 5 cm (2˝) clear above and on either side of the scanner, 10 cm (4˝) behind, and 15 cm (6˝) in front. Additional space is required in front of the scanner when using the following optional adapters and holders:

• FH-3 film holder (available separately): 25 cm (10˝)

• SF-210 slide feeder (available separately for 5000 ED only): 50 cm (20˝)

Vents Vents

Optional Adapters for the 5000 ED

The scanner must be installed on its side (see illustration above at right) when the optional SF-210 slide feeder is in place. The scanner can not be installed on its side when the optional SA-30 roll-film adapter is used.

20