5 Remove the adapter cover

6 Position film at either end of the adapter If neither end of the film is visible, rotate the toothed wheel until one end pro- trudes from the adapter.

7 Open the roller frame

Release the frame lock lever and open the roller frame.

Opening the Roller Frame

Stop when resistance is felt. Attempting to force the frame open past this point could damage the adapter.

8 Remove the film from the adapter Remove the film by pulling gently on the visible end.

Adapter cover

Toothed wheel

Roller frame

Frame lock lever

Roller frame

9 Reassemble the adapter

Close the roller frame, replace the adapter cover, and close the front panel.

Before reinserting film in the SA-21, check that it is undamaged and free of dust and lint. If the film has been damaged and can not be scanned in the SA-21, scan the film as described “Scanning Long, Short, or Damaged Film.”

61

Page 70
Image 70
Nikon 5000ED user manual Adapter cover Toothed wheel Roller frame Frame lock lever