Dell K080D Determine if a conflict exists by, Card failure has, Your computer, Resource conflicts

Light Pattern	Problem Description	Suggested Resolution
	A possible expansion	1	Determine if a conflict exists by
	card failure has		removing an expansion card (not a
Steady	occurred.		graphics card) and restarting the
			computer (see the "Cards" section for
Blue
			your computer).
		2	If the problem persists, reinstall the
			card you removed, then remove a
			different card and restart the
			computer.
		3	Repeat this process for each expansion
			card installed. If the computer starts
			normally, troubleshoot the last card
			removed from the computer for
			resource conflicts.
		4	If the problem persists, contact Dell
			(see "Contacting Dell" on page 66).
	Another failure has	• Ensure that all hard drive and optical
	occurred.		drive cables are properly connected to
Steady			the system board (see the "System

Blue	Board Components" section for your
	computer).
	• If there is an error message on the
	screen identifying a problem with a
	device (such as the floppy drive or
	hard drive), check the device to make
	sure it is functioning properly.
	• If the operating system is attempting
	to boot from a device (such as the
	floppy drive or optical drive), check
	system setup to ensure the boot
	sequence is correct for the devices
	installed on your computer.
	• If the problem persists, contact Dell
	(see "Contacting Dell" on page 66).

46

Troubleshooting Tips