Dell M610 manual Bios Overview / Description

Dell™ PowerEdge™ M610 Technical Guidebook

PCI Express Generation 2

PCI Express is a serial point-to-point interconnect for I/O devices. PCIe Gen2 doubles the signaling bit rate of each lane from 2.5 Gb/s to 5 Gb/s. Each of the PCIe Gen2 ports are backwards-compatible with Gen1 transfer rates.

In the Tylersburg-36D IOH, there are two x2 PCIe Gen2 ports (1Gb/s) and eight x4 PCIe Gen2 ports (2 Gb/s). The x2 ports can be combined as a x4 link; however, this x4 link cannot be combined with any of the other x4 ports. Two neighboring x4 ports can be combined as a x8 link, and both resulting x8 links can combine to form a x16 link.

Intel I/O Controller Hub 9 (ICH9)

ICH9 is a highly integrated I/O controller, supporting the following functions:

•Six x1 PCIe Gen1 ports, with the capability of combining ports 1-4 as a x4 link

•These ports are unused on the PowerEdge M610

•PCI Bus 32-bit Interface Rev 2.3 running at 33MHz

•Up to six Serial ATA (SATA) ports with transfer rates up to 300 MB/s

•The PowerEdge M610 features two SATA port for optional internal optical drive or tape backup

•Six UHCI and two EHCI (High-Speed 2.0) USB host controllers, with up to twelve USB ports

•The PowerEdge M610 has eight external USB ports and two internal ports dedicated for

UIPS. Refer to the Whoville Hardware/BIOS Specification for the USB assignments for each platform

•Power management interface (ACPI 3.0b compliant)

•Platform Environmental Control Interface (PECI)

•Intel Dynamic Power Mode Manager

•I/O interrupt controller

•SMBus 2.0 controller

•Low Pin Count (LPC) interface to Super I/O, Trusted Platform Module (TPM), and SuperVU

•Serial Peripheral Interface (SPI) support for up to two devices

•The PowerEdge M610’s BIOS is connected to the ICH using SPI

Section 8. BIOS

A. Overview / Description

The PowerEdge M610 BIOS is based on the Dell BIOS core, and supports the following features:

•Nehalem-EP 2S Support

•Simultaneous Multi-Threading (SMT) support

•CPU Turbo Mode support

•PCI 2.3 compliant

•Plug n’ Play 1.0a compliant

•MP (Multiprocessor) 1.4 compliant

•Boot from hard drive, external optical drive, iSCSI drive, USB key, and SD card

•ACPI support

•Direct Media Interface (DMI) support

•PXE and WOL support for on-board NICs

•Memory mirroring and spare bank support

•SETUP access through <F2> key at end of POST

•USB 2.0 (USB boot code is 1.1 compliant)

•F1/F2 error logging in CMOS

•Virtual KVM, CD, and floppy support

•Unified Server Configurator (UEFI 2.1) support

•Power management support including DBS, Power Inventory and multiple Power Profiles

19