680 Configuring IP Multicast
Configuring a DVMRP Interface
1.
Open the
DVMRP Interface Configuration
page.
2.
Select the interface to configure from the
Interface
field.
3.
Modify the remaining fields as needed.
4.
Click
Apply Changes
.
The interface configuration is saved, and the device is updated.
Configuring a DVMRP Interface using the CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide:
• DVMRP Commands
DVMRP Configuration Summary
Use the DVMRP Configuration Summary
page to display or print the DVMRP configuration and data
for a selected interface. You must configure at least one router interface before you can display data for a
DVMRP interface. Otherwise you see a message telling you that no router interfaces are available, and
the configuration summary screen is not displayed.
To display the page, click IP Multicast > DVMRP > Configuration Summary in the tree view.