724 Configuring IP Multicast
RP Set Summary
Use the PIM-SM RP Set Summary
page to display the static RP information for the PIM-SM router.
To display the page, click Multicast > PIM-SM > RP Set Summary in the tree view.
Figure 12-51. PIM-SM RP Set Summary
The PIM-SM RP Set Summary page displays the following fields in a table:
•
Group Address
— Displays IP multicast group address.
•
Group Mask
— Displays Multicast group address mask.
•
Address
— Displays IP address of the Candidate-RP.
•
Hold Time (hh:mm:ss)
— The holdtime of a Candidate-RP. If the local router is not the BSR, this
value is 0.
•
Expiry Time (hh:mm:ss)
— The minimum time remaining before the Candidate-RP is declared down.
•
Component
— A number which uniquely identifies the component. Each protocol instance
connected to a separate domain should have a different index value.
Displaying RP Set Summary using the CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide:
• PIM-SM Commands