Configuring Switching Information 403
•
MAC Address
— Specify the MAC address for the binding to be added. This is the Key to the binding
database.
•
VLAN ID
— Select the VLAN from the list for the binding rule. The range of the VLAN ID is 1 to
4093.
•
IP Address
— Specify a valid IP address for the binding rule.
Displaying the DHCP Snooping Static Bindings Summary Table
1.
Open the
DHCP Snooping Static Bindings Configuration
page.
2.
Click
Show All
.
The
DHCP Snooping Static Bindings Summary
table
displays.
Figure 7-117. DHCP Snooping Static Bindings Summary
Configuring DHCP Snooping With CLI Commands
For information about the CLI commands that per form this function, refer to the following chapter in
the
CLI Reference Guide
:
• DHCP Snooping Commands
DHCP Snooping Dynamic Bindings Summary
The DHCP Snooping Dynamic Bindings Summary lists all the DHCP snooping dynamic binding
entries learned on the switch ports.
To access the DHCP Snooping Dynamic Bindings Summary page, click Switching > DHCP Snooping
> Dynamic Bindings Summary in the navigation tree.