Configuring Switching Information 349
Displaying the LACP Parameters Table
1.
Open the
LACP Parameters
page.
2.
Click
Show All
.
The
LACP Parameters Table
displays.
Figure 7-69. LACP Parameters Table
3.
Use the
Unit
drop-down menu to view the
LACP Parameters Table
for other units in the stack, if they
exist.
Modifying LACP Parameters for Multiple Ports
1.
Open the
LACP Parameters
page.
2.
Click
Show All
.
The
LACP Parameters Table
displays.
3.
Click
Edit
for each Port to modify.
4.
Edit the fields as needed.
5.
Click
Apply Changes
.
The LACP Parameter settings are modified, and the device is updated.
Configuring LACP Parameters Using CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide
:
• LACP Commands
LAG Membership
Your switch supports 48 LAGs per system, and eight ports per LAG. Use the LAG Membership page to
assign ports to LAGs and LACPs.