Configuring IP Multicast 687
IGMP Global Configuration
Use the IGMP Global Configuration
page to set IGMP on the system to active or inactive.
To display the page, click IP Multicast > IGMP > Global Configuration in the tree view.
Figure 12-25. IGMP Global Configuration
The IGMP Global Configuration page contains the following field:
•
Admin Mode
— Select Enable or Disable from the drop-dow n menu to set the administrative status
of IGMP in the router to active or inactive. The default is Disable.
Setting the IGMP Mode
1.
Open the
IGMP Global Configuration
page.
2.
Set
Admin Mode
to Enable or Disable, to turn IGMP on or off.
3.
Click
Apply Changes
.
The IGMP configuration is saved, and the device is updated.
Setting IGMP Mode using the CLI Commands
For information about the CLI commands that per form this function, see the following chapter in the
CLI Reference Guide:
• IGMP Commands