386 ConfiguringSwitching Information
Figure 7-100. Link Dependency Group Configuration
3.
To add a port to the
Member Ports
column, click the port in the
Available Ports
column, and then
click the << button to the left of the
Available Ports
column. Ctrl + click to select multiple ports.
4.
To add a port to the
Ports D epen ded On
column, click the port in the
Available Ports
column, and
then click the >> button to the right of th e
Available Port
s column.
5.
Click
Apply Changes
.
The Link Dependency settings for the group are modified, and the device is updated.
6.
Click
Show All
to return to the
Link Dependency Summary
page.
Removing All Ports From a Link Dependency Group
1.
Open the
Link Dependency Summary
page.
2.
From the Group ID row for the Link Dependency group to remove, select the
Remove
check box.
3.
Click
Apply Changes
.
The all ports are removed from the Link Dependency group, and the device is updated.
Configuring Link Dependency Groups With CLI Commands
For information about the CLI commands that per form this function, refer to the following chapter in
the
CLI Reference Guide
:
• Link Dependency Commands