Dell M6220, M6348, M8024 - page 360

358 ConfiguringSwitching Information
Figure 7-75. Add Bridge Multicast Group
3. Select the VLAN ID from the drop-down menu.
4. Define the New Bridge Multicast IP or MAC address.
5. In the Bridge Multicast Group tables, assign a setting by clicking in the Static row for a specific
port/LAG. Each click toggles between S, F, and blank. (not a member).
6. Click Apply Changes .
The bridge multicast address is assigned to the multicast group, ports/LAGs are assigned to the group
(with the
Current rows being updated with the Static settings), and the device is updated.
Assigning an Interface to an existing Multicast Group
1. Open the Bridge Multicast Group page.
2. Select the VLAN ID from the drop-down menu.
The associated
Bridge Multicast Address displays.
3. In the Bridge Multicast Group tables, assign a setting by clicking in the Static row for a specific
port/LAG. Each click toggles between S, F, and blank (not a member).
4. Click Apply Changes .
The interface is assigned to the multicast group, the
Current row is updated with the Static setting,
and the device is updated.