b.base cover
3.Perform the following steps as shown in the illustration:
a.Disconnect the WLAN cables from their connectors on the WLAN card [1].
b.Remove the screw that secures the WLAN card to the computer [2].
c.Remove the WLAN card from the computer [3].
Installing the WLAN Card
1.Place the WLAN card into its slot on the computer.
2.Tighten the screw to secures the WLAN card to the computer.
3.Connect the WLAN cable their connectors on the WLAN card.
4.Install:
a.base cover
b.battery
5.Follow the procedures in After Working Inside Your computer.
Removing the Keyboard Trim
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the battery.
3.Using a plastic scribe, pry the keyboard trim from its edges to release it from the keyboard.
4.Remove the keyboard trim from the keyboard.
15
