Installing the Display Assembly
1. Route the WWAN, WLAN and display-assembly cables through their respective routing channels on
the base chassis and connect to their connectors.
2. Place the display assembly onto their connectors.
3. Tighten the screws to secure the display assembly to the computer.
4. Place the metal bracket on the display-assembly cable and tighten the screw to secure the display
assembly.
5. Install:
a. palmrest
b. keyboard
c. keyboard trim
d. SSD card
e. base cover
f. battery
6. Follow the procedures in After Working Inside Your computer.
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. base cover
c. keyboard trim
d. keyboard
e. SSD card
f. palmrest
g. WWAN card
h. WLAN card
26