5.Perform the following steps as shown in the illustration:
a.Pry the edges of the palmrest [1].
b.Remove the palmrest from the computer [2].
Installing the Palmrest
1.Align the palmrest to its original position on the computer and until it snaps in its place.
2.Tighten the screws to secure the palmrest to the front of the computer.
3.Connect the touch cables to their connectors on the system board.
4.Flip the computer and tighten the screws to secure the palmrest to the computer.
5.Install:
a.keyboard
b.keyboard trim
c.SSD card
d.base cover
e.battery
19
