Option | Description |
|
|
| Allows you to enable or disable the |
| HyperThreading in the processor. |
| Default Setting: Enabled |
Table 8. Power Management
Option | Description | |
|
| |
AC Behavior | Allows the computer to | |
| plugged. The option is disabled. | |
| • | Wake on AC |
Auto On Time | Allows you to set the time at which the computer must turn on | |
| automatically. The options are: | |
| • | Disabled (Default Setting) |
| • | Every Day |
| • | Weekdays |
| • | Select Days |
USB Wake Support | Allows you to enable the USB devices to wake the computer from | |
| standby mode. The option is disabled | |
| • Enable USB Wake Support | |
Wireless Radio Control | Allows you to control the WLAN and WWAN radio. The options are: | |
| • | Control WLAN radio |
| • | Control WWAN radio |
| Default Setting: Both the options are disabled. | |
Wake on LAN/WLAN | This option allows the computer to power up from the off state when | |
| triggered by a special LAN signal. Wake up from the Standby state is | |
| unaffected by this setting and must be enabled in the operating system. | |
| This feature only works when the computer is connected to AC power | |
| supply. | |
| • Disabled - Does not allow the system to power on by special LAN | |
|
| signals when it receives a |
|
| LAN. (Default Setting) |
| • LAN Only - Allows the system to be powered on by special LAN | |
|
| signals. |
| • | WLAN Only |
| • | LAN or WLAN |
Block Sleep | Allows you to block the computer from entering into the sleep state. | |
| This option is disabled by default. | |
| • | Block Sleep (S3) |
Peak Shift | Peak Shift can be used to minimize AC consumption during peak powers | |
| times of day. Set the start and end time to run in Peak Shift mode. | |
• Enable Peak Shift (Disabled)
39
