Installing the Display-Hinge Cover

1.Place the display-hinge cover and tighten the screws to secure the display-hinge cover to the computer.

2.Tighten the screws to secure the display-hinge cover to the computer.

3.Install:

a.palmrest

b.keyboard trim

c.SSD card

d.base cover

e.battery

4.Follow the procedures in After Working Inside Your computer.

Removing the Display Assembly

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.battery

b.base cover

c.keyboard trim

d.keyboard

e.SSD card

f.palmrest

3.Disconnect the power-connector port cable from its connector on the system board..

23

Page 23
Image 23
Dell P22S002 owner manual Installing the Display-Hinge Cover, Removing the Display Assembly