3Connect the black antenna cable with a gray stripe to the connector labeled "aux" (black triangle) and connect the white antenna cable with a gray stripe to the connector labeled "main" (white triangle).

4Secure unused antenna cables in the protective mylar sleeve.

5Replace the cover and tighten the captive screws.

Removing a WPAN Card

1Follow the procedures in "Before You Begin" on page 153.

2Turn the computer over.

3Loosen the captive screws on the cover of the Mini Card compartment and remove the cover.

2

1

1

captive screws (2)

2

cover

4Disconnect the blue antenna cable from the WPAN card.

5Release the WPAN card by pushing the metal securing tabs toward the back of the computer until the card pops up slightly.

6Lift the WPAN card out of its system board connector.

Adding and Replacing Parts

177

Page 177
Image 177
Dell PP22L manual Removing a Wpan Card, 177