Dell R420, E18S001 Troubleshooting The System Battery, Troubleshooting Power Supplies

Models: E18S E18S001 R420

1 145
Download 145 pages 41.96 Kb
Page 108
Image 108

Hard-drive carriers

Hard-drive backplane

4.Ensure that all cables are properly connected.

5.Close the system.

6.Run the system board tests in the system diagnostics.

If the tests fail, see Getting Help.

Troubleshooting The System Battery

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

NOTE: If the system is turned off for long periods of time (for weeks or months), the NVRAM may lose its system configuration information. This situation is caused by a defective battery.

1.Re-enter the time and date in the System Setup.

2.Turn off the system and disconnect it from the electrical outlet for at least one hour.

3.Reconnect the system to the electrical outlet and turn on the system.

4.Enter the System Setup.

If the date and time are not correct in the System Setup, check the SEL for system battery messages.

If the problem is not resolved, see Getting Help.

NOTE: Some software may cause the system time to speed up or slow down. If the system seems to operate normally except for the time kept in the System Setup, the problem may be caused by software rather than by a defective battery.

Troubleshooting Power Supplies

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Reseat the power supply by removing and reinstalling it.

NOTE: After installing a power supply, allow several seconds for the system to recognize the power supply and to determine if it is working properly.

2.If the problem persists, see Getting Help.

Troubleshooting Cooling Problems

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Ensure that none of the following conditions exist:

108

Page 108
Image 108
Dell R420, E18S Troubleshooting The System Battery, Troubleshooting Power Supplies, Troubleshooting Cooling Problems