Removing The Integrated Storage Controller Card
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
2.Open the system.
NOTE: It is recommended that you remove the
3.Push down the two release levers at the edge of the card to disengage the card from the connector.
4.Disengage the card from the
5.Remove the card.
6.Close the system.
7.Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Figure 37. Removing and Installing the Integrated Storage Controller Card
76
