Item | Indicator, Button, or | Icon | Description |
| Connector |
|
|
|
|
|
|
|
|
| To reset the iDRAC (if not disabled in F2 iDRAC setup) |
|
|
| press and hold the button for more than 15 seconds. |
11 | Power supply (PSU1) |
| 350 W and 550 W |
12 | Power supply (PSU2) |
| NOTE: For |
|
|
| only one power supply socket. |
NIC Indicator Codes
Figure 7. NIC Indicator
1.link indicator
2.activity indicator
Indicator | Indicator Code |
Link and activity | The NIC is not connected to the network. |
indicators are off |
|
Link indicator is | The NIC is connected to a valid network at its maximum port speed (1 Gbps or 10 Gbps). |
green |
|
Link indicator is | The NIC is connected to a valid network at less than its maximum port speed. |
amber |
|
Activity indicator is | Network data is being sent or received. |
blinking green |
|
Power Indicator Codes
Each power supply has an illuminated translucent handle that serves as an indicator to show whether power is present or whether a power fault has occurred.
18
