Lamp failure | Lamp is defective. Replace the lamp. | OFF | OFF | AMBER |
Fault - DC | Power supply has been interrupted. The |
supply (+12V) | projector automatically shuts down. |
| Unplug the power cord after three |
| minutes and then turn on the projector. If |
| this problem persists, contact Dell. |
AMBER AMBER AMBER Flashing
Lamp module | Lamp module connection may be |
|
|
| |
connection | disrupted. Check the lamp module and | OFF | OFF | AMBER | |
failed | ensure that it is properly installed. If the | Flashing | |||
|
| ||||
| problem persists, contact Dell. |
|
|
| |
|
|
|
|
|
