Guiding Signals
Projector |
| Control Buttons | Indicator | ||
Description |
|
|
| ||
| TEMP | LAMP | |||
Status | Power | ||||
| |||||
|
| (Amber) | (Amber) | ||
|
|
| |||
|
|
|
|
| |
Standby mode | Projector in Standby mode. Ready to | BLUE | OFF | OFF | |
| power on. | Flashing | |||
|
|
| |||
|
|
|
|
| |
Warming up | Projector takes some time to warm up | BLUE | OFF | OFF | |
mode | and power on. | ||||
|
|
| |||
|
|
|
|
| |
Lamp on | Projector in Normal mode, ready to |
|
|
| |
| display an image. | BLUE | OFF | OFF | |
| Note: The OSD menu is not | ||||
|
|
|
| ||
| accessed. |
|
|
| |
|
|
|
|
| |
Cooling mode | Projector is cooling to shutdown. | BLUE | OFF | OFF | |
|
|
|
|
| |
Power Saving | Power Saving mode has been activated. |
|
|
| |
mode | The projector will automatically enter | AMBER | OFF | OFF | |
| standby mode, if an input signal is not | Flashing | |||
|
|
| |||
| detected in two hours. |
|
|
| |
|
|
|
|
| |
Cooling before | The projector takes 60 seconds to cool |
|
|
| |
Power Saving | down before entering Power Saving | AMBER | OFF | OFF | |
mode | mode. |
|
|
| |
|
|
|
|
| |
Projector | Air vents might be blocked or ambient |
|
|
| |
overheated | temperature may be above 35ºC. The |
|
|
| |
| projector automatically shuts down. |
|
|
| |
| Ensure that the air vents are not blocked | OFF | AMBER | OFF | |
| and that the ambient temperature is |
|
|
| |
| within operational range. If the problem |
|
|
| |
| persists, contact Dell. |
|
|
| |
|
|
|
|
| |
Lamp driver | The lamp driver is overheated. The air |
|
|
| |
overheated | vents may be blocked. The projector |
|
|
| |
| automatically shuts down. Turn the | AMBER | AMBER | OFF | |
| display on again after the projector cools | ||||
|
|
|
| ||
| down. If the problem persists, contact |
|
|
| |
| Dell. |
|
|
| |
|
|
|
|
| |
Fan breakdown | One of the fans has failed. The projector |
| AMBER |
| |
| automatically shuts down. If the problem | OFF | OFF | ||
| Flashing | ||||
| persists, contact Dell. |
|
| ||
|
|
|
| ||
|
|
|
|
| |
Lamp driver | The lamp driver has failed. The projector |
|
|
| |
breakdown | automatically shuts down. Unplug the | AMBER |
| AMBER | |
| power cord after three minutes then turn | OFF | |||
| Flashing | Flashing | |||
| the display on again. If this problem |
| |||
|
|
|
| ||
| persists, contact Dell. |
|
|
| |
|
|
|
|
| |
Color Wheel | Color wheel cannot start. The projector |
|
|
| |
breakdown | has failed and the projector |
|
|
| |
| automatically shuts down. Unplug the | BLUE | AMBER | AMBER | |
| power cord after three minutes and then | Flashing | Flashing | ||
|
| ||||
turn on the projector. If this problem persists, contact Dell.
