Dell S300wi manual Wireless / Network

WIRELESS / NETWORK

The Wireless / Network menu allows you to configure the network connection settings.

DHCP ADDRESS—If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired when you select DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use to select the number of IP Address, Subnet Mask, and Gateway. Key in

Enter to confirm each number and then use to set the next item.

IP ADDRESS—Automatically or manually assigns the IP address to the projector connected to the network.

SUBNET MASK—Configure the Subnet Mask of the network connection.

GATEWAY—Check the Gateway address with your network/system administrator if you configure it manually.

DNS—Check the DNS Server IP address with your network/system administrator if you configure it manually.

STORE—Press to save the changes made in network configuration settings.

NOTE:

1Use and button to select IP Address, Subnet Mask, Gateway, DNS and Store.

2Press the button to enter IP Address, Subnet Mask, Gateway or DNS to set the value. (The selected option is highlighted in yellow)

a Use and button to select the option. b Use and button to set the value.

c After the setup is complete, press the button to exit.

56

Using Your Projector