Dell S300wi - page 70

70 Using Your Projector
In order to use your projector wirelessly, you need to complete the steps below:
1Install the wireless antenna. See "Installing the Antenna" on page13.
2Enable wireless connection on the projector. See "WIRELESS /
NETWORK" on page56.
NOTE: When you start wireless, please wait about 50 seconds reboot the
Wireless / Network.
3On INPUT SELECT menu, select Multiple Display and then select Wireless
display on sub-menu. See "INPUT SELECT" on page46. The Wi reless
Guide Screen shown below appears.
4Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP
ADDRESS. You will need these information to login later.
5Connect your computer to the S300wi network.