Dell DHP, T8243 manual Drives, CD/DVD drive Hard drive

4If you are removing the card permanently, install a filler bracket in the empty card-slot opening.

If you need a filler bracket, contact Dell (see page 108).

NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer.

5Secure the card(s) in the computer.

NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.

6Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.

7Remove the card’s driver from the operating system.

8Install any drivers required for the card as described in the card documentation.

Drives

Your computer supports a combination of these devices:

•One serial ATA drive

•One FlexBay drive (optional floppy drive or media card reader)

•One CD or DVD drive

CD/DVD drive

hard drive

FlexBay for optional floppy drive or media card reader (under CD/DVD drive)

Connect CD/DVD drives to the connector labeled "IDE" on the system board. Serial ATA hard drives should be connected to the connectors labeled "SATA0" or "SATA2" on the system board.

Removing and Installing Parts

71