Dell DHP, T8243 manual Floppy Drive Optional, Removing a Floppy Drive

7Replace the CD/DVD drive (see page 77).

8Replace the computer cover (see page 91).

NOTICE: To connect a network cable, first plug the cable in to the network device and then plug it in to the computer.

9Connect your computer and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

10Enter system setup (see page 97) and select the appropriate Drive option.

11Verify that your computer works correctly by running the Dell Diagnostics (see page 43).

Floppy Drive (Optional)

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

Removing a Floppy Drive

1Follow the procedures in "Before You Begin" on page 53.

2Lay the computer on its side so that the system board is on the bottom of the inside of the computer.

3Remove the computer cover (see page 59).

4Remove the CD/DVD drive (see page 76).

5Pull up on the drive release latch and slide the floppy drive towards the back of the computer. Then, lift up to remove the drive from the computer.

Removing and Installing Parts

83