Quick Reference Guide 11
Mini Tower Computer — Back-Panel Connectors
1cover-release latch This latch allows you to open the computer cover.
2padlock ring Insert a padlock to lock the computer cover.
3voltage selection switch Your computer is equipped with a manual voltage-selection switch.
To help avoid damaging a computer with a manual voltage-selection switch, set
the switch for the voltage that most closely matches the AC power available in
your location.
NOTICE: The voltage selection switch must be set to the 115-V position even
though the AC power available in Japan is 100 V.
Also, ensure that your monitor and attached devices are electrically rated to
operate with the AC power available in your location.
4power connector Insert the power cable.
5back-panel connectors Plug serial, USB, and other devices into the appropriate connectors (see "Mini
Tower Computer — Back-Panel Connectors" on page11).
6card slots Access connectors for any installed PCI and PCI Express cards.
13
98 7
5
6
24
book.book Page 11 Wednesday, March 14, 2007 11:21 AM