![](/images/new-backgrounds/1247217/247217113x1.webp)
System | |
Main System Chassis |
For more information on the systems support for remote access devices, see the Dell Systems Software Support Matrix available at dell.com/support/manuals.
Server Administrator allows remote,
You can perform the following tasks:
•Viewing Basic Information
•Configuring The Remote Access Device To Use A LAN Connection
•Configuring The Remote Access Device To Use A Serial Over LAN Connection
•Configuring The Remote Access Device To Use A Serial Port Connection
•Additional Configuration For iDRAC
•Configuring Remote Access Device Users
•Setting Platform Event Filter Alerts
You can view BMC/iDRAC or DRAC information based on which hardware is providing the remote access capabilities for the system.
The reporting and configuration of BMC/iDRAC and DRAC can also be managed using the omreport/omconfig chassis remoteaccess
In addition, the Server Administrator Instrumentation Service allows you to manage the Platform Event Filters (PEF) parameters and alert destinations.
NOTE: You can view BMC data on Dell PowerEdge 9G systems only.
Viewing Basic Information
You can view basic information about the BMC/iDRAC, IPv4 Address, and DRAC. You can also reset the Remote access controller settings to their default values. To do this:
NOTE: You must be logged in with Administrator privileges to reset the BMC settings.
Click the Modular Enclosure → System/Server Module → Main System Chassis/Main System → Remote Access
The Remote Access page displays the following base information of the system’s BMC:
Remote Access Device
•Device Type
•IPMI Version
•System GUID
•Number of Possible Active Sessions
•Number of Current Active Sessions
•LAN Enabled
•SOL Enabled
•MAC Address
57