Returning to a Pre-marked Position
If you wish to return to a particular scene later, mark the point with the zero set memory, and the tape will stop at that point when you rewind/fast forward the tape.
This function is operated with the wireless controller.
REW 
button 
ZERO SET MEMORY 
STOP 
button button 
1.Press the ZERO SET MEMORY button at the point you wish to return to later.
•The tape counter is reset to 0:00:00 and the 
mark appears.
•To cancel, press the ZERO SET MEMORY button again.
2.After you finish playing back the tape, rewind the tape.
•“
RTN” appears.
•The tape stops automatically at “0:00:00” and the 
mark disappears.
•The tape counter changes to time code.
The zero set memory may not function correctly if the time code has not been recorded consecutively.
The zero set memory function may not work correctly if you mix recordings in HDV and DV standards on the same tape.
102