RecordingEditingan External Video Signal (Analog Line-In, HDV/DV In)
You can record on the tape an external video signal, either from the analog video input (SD standard) or E from the HDV/DV input (SD or HD standard).
Analog
You can select the audio channels to be recorded along with the video signal.
1. Connect the camcorder to the analog video device.
For the connection diagram to an analog device refer to Section 4 of Connecting to a Monitor/TV (
98).
2.Set the POWER dial to 
and load a blank cassette.
3.Open the menu and select [AUDIO SETUP]. Select [AUDIO MODE], select a setting option and close the menu.
4.Select the audio input.
Select the input with the INPUT SELECT switch of AUDIO1 (for analog
5.Connected device: Load the recorded cassette.
6.Press the 
and 
buttons (or the REC PAUSE button on the wireless controller).
•The camcorder enters the record pause mode. In this mode you can monitor the picture on the screen.
•If you press only the 
button, recording will start immediately.
7.Connected device: Play back the tape.
8.Press the 
button (or the PAUSE 
button on the wireless controller) when the
scene you wish to record appears.
Recording starts.
9.Press the 
button to stop recording.
10.Connected device: Stop playback.
HDV/DV In
1. Connect the camcorder to the external video device.
For the connection diagram to a digital device refer to Section 3 of Connecting to a Monitor/TV (
98).
2.Set the POWER dial to 
and load a blank cassette.
3.Connected device: Load the recorded cassette or disc.
4.Press the 
and 
buttons (or the REC PAUSE button on the wireless controller).
•The camcorder enters the record pause mode. In this mode you can monitor the picture on the screen.
•If you press only the 
button, recording will start immediately.
5.Connected device: Start the playback.
6.Press the 
button (or the PAUSE 
button on the wireless controller) when the
scene you wish to record appears.
Recording starts.
7.Press the 
button to stop recording.
8.Connected device: Stop playback.
Editing
107